Fabric finishing Hot Air Stenter Machine , Automatic operation , Long service life
1. Working process:
High fabric entry frame ----- J-scray with Cloth guider ---- Padder mangle with tension applicator --- Weft straightner ---- Expanding roller ---- Overfeeding with screw expending ---- Edge detecting device & uncurler device--- Clipping/pinning-on ---- Chambers for setting ---Air cooling unit--- Clipping/pinning -off ---- End section --- Plaiting & batching.
2. Machine automation feature:
The VK-NM model stenter is a fully automated and complex machine with the most modern PLC control system which ensures optimum production from the Stenter. The level of automation can be designed for specific requirements of individual customers. Typical level of automation to access and control basic machine parameters, functions and displays using PLC with Graphic Colour Screen Display of various functions on a Visual Display Unit/Touch Screen can be as follows:
1) Chamber temperature setting & control,
2) Overfeeding rate control,
3) Machine running speed,
4) Chamber width indication and control,
5) Exhaust moisture control in the chamber,
6) Squeezing pressure
7) Machine alarm record
etc.
3. Main technical data:
| Machine roller width: |
1400-3800mm |
Fabric working width: |
1200-3600mm
|
| Heating source: |
nature gas / oil /
electricity / steam
|
Width adjustment range: |
700-3600mm
|
|
Chambers quantity.
|
2-10 |
Temperature range of chambers: |
100-230℃
|
| Fabric held by: |
clip/pin/combined
|
Air pressure: |
above 0.5mpa |
| Overfeed range: |
-10% to 30%
|
Installed power: |
Approx 120Kw
|
Product Tags:
|
|
Fabric Finishing Hot Air Stenter , Finishing Machines Textile With Long Service Life Images
|
